Journeyman Team Event – OH Transformer Changeout

Chief Judge:  Kenny Infinger

Drop Dead Time: 15:00

Event Summary: 

This event is simulated energized and consists of changing out an overhead 10 KVA CSP pole-mounted transformer on a 40’ A1.1 (A1).  All team members shall maintain a minimum approach distance of 2’ 2” to all exposed energized conductors for this event.  The 2’ 2” MAD will be marked on the pole. At a minimum the neutral must be covered.  A transformer gin will be provided by the SCLR for this event and WILL be mounted on the pole.

Event Rules:

  1. Teams will have 5 minutes to set up & ask the event judge questions. 
  2. Time will start on the judge’s signal.
  3. Time stops when the transformer has been re-energized and all climbers are safely on the ground.
  4. The CSP transformer secondary breaker shall be opened prior to disconnecting the transformer from the primary conductor. A 10-point deduction will be assessed for this infraction.
  5. Tools and equipment shall always be on the provided tarp when not in use.
  6. A new pre-cut transformer lead and hotline clamp will be provided and shall be installed on the transformer.
  7. All connections shall be brushed.
  8. All rigging equipment will be inspected by the judge and shall not exceed its rated Working Load Limit.
  9. Positive control of rigging ropes shall always be maintained.
  10. Judging will continue while the team restores the site to its original condition.
  11. All general rules apply.
Overhead Transformer Changeout